Monster Mill MM3 3-Roller Mill
The MM-3 consists of a 6061 aluminum block frame with three 6" long steel rollers riding on SAE 841 oil impregnated bronze bushings. The drive shaft, and all the axles are integral to the roller rather than screwed into the ends. This makes it fine to drive the mill clockwise, or counter-clockwise. All the axles are 3/8 One of the knurled steel rollers is driven by a standard 3/8" electric drill (not included) to feed the grain through the adjustable gap and crush the grist. The knob is held in a fixed position by a set-screw that you can loosen to adjust the mill. This system provides an adjustment range of .070". Our knobs are made from 303 stainless steel for excellent durability, If you don't purchase our base and hopper, you will need to fabricate one to feed the grist through the mill. The mill can be mounted above or below the base and attached using the included mounting bolts.
Features and specs;
6" long adjustable gap fully adjustable mill dual eccentric adjusters: 0 to .070" gap - built from stainless steel for no galling average throughput 6 lbs / minute 6" x 1.5" diameter steel rollers drill-drive -- CW or CCW alloy frame SAE 841 oil impregnated bronze bushings 3/8" integral drive shaft w/3 flats for drill driving, 2" long outside frameside frame 3/8" integral axles