Welcome Back, Guest | LOGOUT?
View My Cart  (0)
25 Ft Stainless Steel Immersion Chiller 3/8 Tubing

25 Ft Stainless Steel Immersion Chiller 3/8 Tubing

Your Price: $59.95
In Stock.
Part Number:WC25SS

Keggle Brewing’s 25ft  immersion wort chiller, will give you the best return on investment. Simply hook up the hose to your tap, place the coil of 3/8" Stainless Steel tubing into the wort and run the other end to a drain. The cold tap water will quickly feed through the coil, maximizing it's time in the wort to turn out warm water on the other side. Just drop the immersion chiller into the brew pot. The preferred method of sanitation is to make sure it is clean to the eye and then include the Stainless portion of the unit in the wort during the last 15 minutes of the boil, this will kill any wild yeasts or unsanitary pests that might be introduced. Once it's taken off the boil you can immediately start cooling it off just by hooking up the line and turning on the water. Our wort chiller is approximate 9.5" in diameter, the coils are 6"to 7" tall and 15.5" in total height. The coil is made of 3/8" Stainless Steel   tubing and is 25 feet long to ensure maximum surface area for the hot wort to contact the cold water. The ends are connected by a compression fitting. Due to being made from tubing, the immersion chiller can be slightly deformed during shipping, but is easily bent back into shape with gentle force.

Related Items

Recently Viewed Items

Subscribe Unsubscribe